Your IP : 3.133.153.224
package IO::Uncompress::Base ;
use strict ;
use warnings;
use bytes;
our (@ISA, $VERSION, @EXPORT_OK, %EXPORT_TAGS);
@ISA = qw(IO::File Exporter);
$VERSION = '2.081';
use constant G_EOF => 0 ;
use constant G_ERR => -1 ;
use IO::Compress::Base::Common 2.081 ;
use IO::File ;
use Symbol;
use Scalar::Util ();
use List::Util ();
use Carp ;
%EXPORT_TAGS = ( );
push @{ $EXPORT_TAGS{all} }, @EXPORT_OK ;
sub smartRead
{
my $self = $_[0];
my $out = $_[1];
my $size = $_[2];
$$out = "" ;
my $offset = 0 ;
my $status = 1;
if (defined *$self->{InputLength}) {
return 0
if *$self->{InputLengthRemaining} <= 0 ;
$size = List::Util::min($size, *$self->{InputLengthRemaining});
}
if ( length *$self->{Prime} ) {
$$out = substr(*$self->{Prime}, 0, $size) ;
substr(*$self->{Prime}, 0, $size) = '' ;
if (length $$out == $size) {
*$self->{InputLengthRemaining} -= length $$out
if defined *$self->{InputLength};
return length $$out ;
}
$offset = length $$out ;
}
my $get_size = $size - $offset ;
if (defined *$self->{FH}) {
if ($offset) {
# Not using this
#
# *$self->{FH}->read($$out, $get_size, $offset);
#
# because the filehandle may not support the offset parameter
# An example is Net::FTP
my $tmp = '';
$status = *$self->{FH}->read($tmp, $get_size) ;
substr($$out, $offset) = $tmp
if defined $status && $status > 0 ;
}
else
{ $status = *$self->{FH}->read($$out, $get_size) }
}
elsif (defined *$self->{InputEvent}) {
my $got = 1 ;
while (length $$out < $size) {
last
if ($got = *$self->{InputEvent}->($$out, $get_size)) <= 0;
}
if (length $$out > $size ) {
*$self->{Prime} = substr($$out, $size, length($$out));
substr($$out, $size, length($$out)) = '';
}
*$self->{EventEof} = 1 if $got <= 0 ;
}
else {
no warnings 'uninitialized';
my $buf = *$self->{Buffer} ;
$$buf = '' unless defined $$buf ;
substr($$out, $offset) = substr($$buf, *$self->{BufferOffset}, $get_size);
if (*$self->{ConsumeInput})
{ substr($$buf, 0, $get_size) = '' }
else
{ *$self->{BufferOffset} += length($$out) - $offset }
}
*$self->{InputLengthRemaining} -= length($$out) #- $offset
if defined *$self->{InputLength};
if (! defined $status) {
$self->saveStatus($!) ;
return STATUS_ERROR;
}
$self->saveStatus(length $$out < 0 ? STATUS_ERROR : STATUS_OK) ;
return length $$out;
}
sub pushBack
{
my $self = shift ;
return if ! defined $_[0] || length $_[0] == 0 ;
if (defined *$self->{FH} || defined *$self->{InputEvent} ) {
*$self->{Prime} = $_[0] . *$self->{Prime} ;
*$self->{InputLengthRemaining} += length($_[0]);
}
else {
my $len = length $_[0];
if($len > *$self->{BufferOffset}) {
*$self->{Prime} = substr($_[0], 0, $len - *$self->{BufferOffset}) . *$self->{Prime} ;
*$self->{InputLengthRemaining} = *$self->{InputLength};
*$self->{BufferOffset} = 0
}
else {
*$self->{InputLengthRemaining} += length($_[0]);
*$self->{BufferOffset} -= length($_[0]) ;
}
}
}
sub smartSeek
{
my $self = shift ;
my $offset = shift ;
my $truncate = shift;
my $position = shift || SEEK_SET;
# TODO -- need to take prime into account
*$self->{Prime} = '';
if (defined *$self->{FH})
{ *$self->{FH}->seek($offset, $position) }
else {
if ($position == SEEK_END) {
*$self->{BufferOffset} = length(${ *$self->{Buffer} }) + $offset ;
}
elsif ($position == SEEK_CUR) {
*$self->{BufferOffset} += $offset ;
}
else {
*$self->{BufferOffset} = $offset ;
}
substr(${ *$self->{Buffer} }, *$self->{BufferOffset}) = ''
if $truncate;
return 1;
}
}
sub smartTell
{
my $self = shift ;
if (defined *$self->{FH})
{ return *$self->{FH}->tell() }
else
{ return *$self->{BufferOffset} }
}
sub smartWrite
{
my $self = shift ;
my $out_data = shift ;
if (defined *$self->{FH}) {
# flush needed for 5.8.0
defined *$self->{FH}->write($out_data, length $out_data) &&
defined *$self->{FH}->flush() ;
}
else {
my $buf = *$self->{Buffer} ;
substr($$buf, *$self->{BufferOffset}, length $out_data) = $out_data ;
*$self->{BufferOffset} += length($out_data) ;
return 1;
}
}
sub smartReadExact
{
return $_[0]->smartRead($_[1], $_[2]) == $_[2];
}
sub smartEof
{
my ($self) = $_[0];
local $.;
return 0 if length *$self->{Prime} || *$self->{PushMode};
if (defined *$self->{FH})
{
# Could use
#
# *$self->{FH}->eof()
#
# here, but this can cause trouble if
# the filehandle is itself a tied handle, but it uses sysread.
# Then we get into mixing buffered & non-buffered IO,
# which will cause trouble
my $info = $self->getErrInfo();
my $buffer = '';
my $status = $self->smartRead(\$buffer, 1);
$self->pushBack($buffer) if length $buffer;
$self->setErrInfo($info);
return $status == 0 ;
}
elsif (defined *$self->{InputEvent})
{ *$self->{EventEof} }
else
{ *$self->{BufferOffset} >= length(${ *$self->{Buffer} }) }
}
sub clearError
{
my $self = shift ;
*$self->{ErrorNo} = 0 ;
${ *$self->{Error} } = '' ;
}
sub getErrInfo
{
my $self = shift ;
return [ *$self->{ErrorNo}, ${ *$self->{Error} } ] ;
}
sub setErrInfo
{
my $self = shift ;
my $ref = shift;
*$self->{ErrorNo} = $ref->[0] ;
${ *$self->{Error} } = $ref->[1] ;
}
sub saveStatus
{
my $self = shift ;
my $errno = shift() + 0 ;
*$self->{ErrorNo} = $errno;
${ *$self->{Error} } = '' ;
return *$self->{ErrorNo} ;
}
sub saveErrorString
{
my $self = shift ;
my $retval = shift ;
${ *$self->{Error} } = shift ;
*$self->{ErrorNo} = @_ ? shift() + 0 : STATUS_ERROR ;
return $retval;
}
sub croakError
{
my $self = shift ;
$self->saveErrorString(0, $_[0]);
croak $_[0];
}
sub closeError
{
my $self = shift ;
my $retval = shift ;
my $errno = *$self->{ErrorNo};
my $error = ${ *$self->{Error} };
$self->close();
*$self->{ErrorNo} = $errno ;
${ *$self->{Error} } = $error ;
return $retval;
}
sub error
{
my $self = shift ;
return ${ *$self->{Error} } ;
}
sub errorNo
{
my $self = shift ;
return *$self->{ErrorNo};
}
sub HeaderError
{
my ($self) = shift;
return $self->saveErrorString(undef, "Header Error: $_[0]", STATUS_ERROR);
}
sub TrailerError
{
my ($self) = shift;
return $self->saveErrorString(G_ERR, "Trailer Error: $_[0]", STATUS_ERROR);
}
sub TruncatedHeader
{
my ($self) = shift;
return $self->HeaderError("Truncated in $_[0] Section");
}
sub TruncatedTrailer
{
my ($self) = shift;
return $self->TrailerError("Truncated in $_[0] Section");
}
sub postCheckParams
{
return 1;
}
sub checkParams
{
my $self = shift ;
my $class = shift ;
my $got = shift || IO::Compress::Base::Parameters::new();
my $Valid = {
'blocksize' => [IO::Compress::Base::Common::Parse_unsigned, 16 * 1024],
'autoclose' => [IO::Compress::Base::Common::Parse_boolean, 0],
'strict' => [IO::Compress::Base::Common::Parse_boolean, 0],
'append' => [IO::Compress::Base::Common::Parse_boolean, 0],
'prime' => [IO::Compress::Base::Common::Parse_any, undef],
'multistream' => [IO::Compress::Base::Common::Parse_boolean, 0],
'transparent' => [IO::Compress::Base::Common::Parse_any, 1],
'scan' => [IO::Compress::Base::Common::Parse_boolean, 0],
'inputlength' => [IO::Compress::Base::Common::Parse_unsigned, undef],
'binmodeout' => [IO::Compress::Base::Common::Parse_boolean, 0],
#'decode' => [IO::Compress::Base::Common::Parse_any, undef],
#'consumeinput' => [IO::Compress::Base::Common::Parse_boolean, 0],
$self->getExtraParams(),
#'Todo - Revert to ordinary file on end Z_STREAM_END'=> 0,
# ContinueAfterEof
} ;
$Valid->{trailingdata} = [IO::Compress::Base::Common::Parse_writable_scalar, undef]
if *$self->{OneShot} ;
$got->parse($Valid, @_ )
or $self->croakError("${class}: " . $got->getError()) ;
$self->postCheckParams($got)
or $self->croakError("${class}: " . $self->error()) ;
return $got;
}
sub _create
{
my $obj = shift;
my $got = shift;
my $append_mode = shift ;
my $class = ref $obj;
$obj->croakError("$class: Missing Input parameter")
if ! @_ && ! $got ;
my $inValue = shift ;
*$obj->{OneShot} = 0 ;
if (! $got)
{
$got = $obj->checkParams($class, undef, @_)
or return undef ;
}
my $inType = whatIsInput($inValue, 1);
$obj->ckInputParam($class, $inValue, 1)
or return undef ;
*$obj->{InNew} = 1;
$obj->ckParams($got)
or $obj->croakError("${class}: " . *$obj->{Error});
if ($inType eq 'buffer' || $inType eq 'code') {
*$obj->{Buffer} = $inValue ;
*$obj->{InputEvent} = $inValue
if $inType eq 'code' ;
}
else {
if ($inType eq 'handle') {
*$obj->{FH} = $inValue ;
*$obj->{Handle} = 1 ;
# Need to rewind for Scan
*$obj->{FH}->seek(0, SEEK_SET)
if $got->getValue('scan');
}
else {
no warnings ;
my $mode = '<';
$mode = '+<' if $got->getValue('scan');
*$obj->{StdIO} = ($inValue eq '-');
*$obj->{FH} = new IO::File "$mode $inValue"
or return $obj->saveErrorString(undef, "cannot open file '$inValue': $!", $!) ;
}
*$obj->{LineNo} = $. = 0;
setBinModeInput(*$obj->{FH}) ;
my $buff = "" ;
*$obj->{Buffer} = \$buff ;
}
# if ($got->getValue('decode')) {
# my $want_encoding = $got->getValue('decode');
# *$obj->{Encoding} = IO::Compress::Base::Common::getEncoding($obj, $class, $want_encoding);
# }
# else {
# *$obj->{Encoding} = undef;
# }
*$obj->{InputLength} = $got->parsed('inputlength')
? $got->getValue('inputlength')
: undef ;
*$obj->{InputLengthRemaining} = $got->getValue('inputlength');
*$obj->{BufferOffset} = 0 ;
*$obj->{AutoClose} = $got->getValue('autoclose');
*$obj->{Strict} = $got->getValue('strict');
*$obj->{BlockSize} = $got->getValue('blocksize');
*$obj->{Append} = $got->getValue('append');
*$obj->{AppendOutput} = $append_mode || $got->getValue('append');
*$obj->{ConsumeInput} = $got->getValue('consumeinput');
*$obj->{Transparent} = $got->getValue('transparent');
*$obj->{MultiStream} = $got->getValue('multistream');
# TODO - move these two into RawDeflate
*$obj->{Scan} = $got->getValue('scan');
*$obj->{ParseExtra} = $got->getValue('parseextra')
|| $got->getValue('strict') ;
*$obj->{Type} = '';
*$obj->{Prime} = $got->getValue('prime') || '' ;
*$obj->{Pending} = '';
*$obj->{Plain} = 0;
*$obj->{PlainBytesRead} = 0;
*$obj->{InflatedBytesRead} = 0;
*$obj->{UnCompSize} = new U64;
*$obj->{CompSize} = new U64;
*$obj->{TotalInflatedBytesRead} = 0;
*$obj->{NewStream} = 0 ;
*$obj->{EventEof} = 0 ;
*$obj->{ClassName} = $class ;
*$obj->{Params} = $got ;
if (*$obj->{ConsumeInput}) {
*$obj->{InNew} = 0;
*$obj->{Closed} = 0;
return $obj
}
my $status = $obj->mkUncomp($got);
return undef
unless defined $status;
*$obj->{InNew} = 0;
*$obj->{Closed} = 0;
return $obj
if *$obj->{Pause} ;
if ($status) {
# Need to try uncompressing to catch the case
# where the compressed file uncompresses to an
# empty string - so eof is set immediately.
my $out_buffer = '';
$status = $obj->read(\$out_buffer);
if ($status < 0) {
*$obj->{ReadStatus} = [ $status, $obj->error(), $obj->errorNo() ];
}
$obj->ungetc($out_buffer)
if length $out_buffer;
}
else {
return undef
unless *$obj->{Transparent};
$obj->clearError();
*$obj->{Type} = 'plain';
*$obj->{Plain} = 1;
$obj->pushBack(*$obj->{HeaderPending}) ;
}
push @{ *$obj->{InfoList} }, *$obj->{Info} ;
$obj->saveStatus(STATUS_OK) ;
*$obj->{InNew} = 0;
*$obj->{Closed} = 0;
return $obj;
}
sub ckInputParam
{
my $self = shift ;
my $from = shift ;
my $inType = whatIsInput($_[0], $_[1]);
$self->croakError("$from: input parameter not a filename, filehandle, array ref or scalar ref")
if ! $inType ;
# if ($inType eq 'filename' )
# {
# return $self->saveErrorString(1, "$from: input filename is undef or null string", STATUS_ERROR)
# if ! defined $_[0] || $_[0] eq '' ;
#
# if ($_[0] ne '-' && ! -e $_[0] )
# {
# return $self->saveErrorString(1,
# "input file '$_[0]' does not exist", STATUS_ERROR);
# }
# }
return 1;
}
sub _inf
{
my $obj = shift ;
my $class = (caller)[0] ;
my $name = (caller(1))[3] ;
$obj->croakError("$name: expected at least 1 parameters\n")
unless @_ >= 1 ;
my $input = shift ;
my $haveOut = @_ ;
my $output = shift ;
my $x = new IO::Compress::Base::Validator($class, *$obj->{Error}, $name, $input, $output)
or return undef ;
push @_, $output if $haveOut && $x->{Hash};
*$obj->{OneShot} = 1 ;
my $got = $obj->checkParams($name, undef, @_)
or return undef ;
if ($got->parsed('trailingdata'))
{
# my $value = $got->valueRef('TrailingData');
# warn "TD $value ";
# #$value = $$value;
## warn "TD $value $$value ";
#
# return retErr($obj, "Parameter 'TrailingData' not writable")
# if readonly $$value ;
#
# if (ref $$value)
# {
# return retErr($obj,"Parameter 'TrailingData' not a scalar reference")
# if ref $$value ne 'SCALAR' ;
#
# *$obj->{TrailingData} = $$value ;
# }
# else
# {
# return retErr($obj,"Parameter 'TrailingData' not a scalar")
# if ref $value ne 'SCALAR' ;
#
# *$obj->{TrailingData} = $value ;
# }
*$obj->{TrailingData} = $got->getValue('trailingdata');
}
*$obj->{MultiStream} = $got->getValue('multistream');
$got->setValue('multistream', 0);
$x->{Got} = $got ;
# if ($x->{Hash})
# {
# while (my($k, $v) = each %$input)
# {
# $v = \$input->{$k}
# unless defined $v ;
#
# $obj->_singleTarget($x, $k, $v, @_)
# or return undef ;
# }
#
# return keys %$input ;
# }
if ($x->{GlobMap})
{
$x->{oneInput} = 1 ;
foreach my $pair (@{ $x->{Pairs} })
{
my ($from, $to) = @$pair ;
$obj->_singleTarget($x, $from, $to, @_)
or return undef ;
}
return scalar @{ $x->{Pairs} } ;
}
if (! $x->{oneOutput} )
{
my $inFile = ($x->{inType} eq 'filenames'
|| $x->{inType} eq 'filename');
$x->{inType} = $inFile ? 'filename' : 'buffer';
foreach my $in ($x->{oneInput} ? $input : @$input)
{
my $out ;
$x->{oneInput} = 1 ;
$obj->_singleTarget($x, $in, $output, @_)
or return undef ;
}
return 1 ;
}
# finally the 1 to 1 and n to 1
return $obj->_singleTarget($x, $input, $output, @_);
croak "should not be here" ;
}
sub retErr
{
my $x = shift ;
my $string = shift ;
${ $x->{Error} } = $string ;
return undef ;
}
sub _singleTarget
{
my $self = shift ;
my $x = shift ;
my $input = shift;
my $output = shift;
my $buff = '';
$x->{buff} = \$buff ;
my $fh ;
if ($x->{outType} eq 'filename') {
my $mode = '>' ;
$mode = '>>'
if $x->{Got}->getValue('append') ;
$x->{fh} = new IO::File "$mode $output"
or return retErr($x, "cannot open file '$output': $!") ;
binmode $x->{fh} if $x->{Got}->valueOrDefault('binmodeout');
}
elsif ($x->{outType} eq 'handle') {
$x->{fh} = $output;
binmode $x->{fh} if $x->{Got}->valueOrDefault('binmodeout');
if ($x->{Got}->getValue('append')) {
seek($x->{fh}, 0, SEEK_END)
or return retErr($x, "Cannot seek to end of output filehandle: $!") ;
}
}
elsif ($x->{outType} eq 'buffer' )
{
$$output = ''
unless $x->{Got}->getValue('append');
$x->{buff} = $output ;
}
if ($x->{oneInput})
{
defined $self->_rd2($x, $input, $output)
or return undef;
}
else
{
for my $element ( ($x->{inType} eq 'hash') ? keys %$input : @$input)
{
defined $self->_rd2($x, $element, $output)
or return undef ;
}
}
if ( ($x->{outType} eq 'filename' && $output ne '-') ||
($x->{outType} eq 'handle' && $x->{Got}->getValue('autoclose'))) {
$x->{fh}->close()
or return retErr($x, $!);
delete $x->{fh};
}
return 1 ;
}
sub _rd2
{
my $self = shift ;
my $x = shift ;
my $input = shift;
my $output = shift;
my $z = IO::Compress::Base::Common::createSelfTiedObject($x->{Class}, *$self->{Error});
$z->_create($x->{Got}, 1, $input, @_)
or return undef ;
my $status ;
my $fh = $x->{fh};
while (1) {
while (($status = $z->read($x->{buff})) > 0) {
if ($fh) {
local $\;
print $fh ${ $x->{buff} }
or return $z->saveErrorString(undef, "Error writing to output file: $!", $!);
${ $x->{buff} } = '' ;
}
}
if (! $x->{oneOutput} ) {
my $ot = $x->{outType} ;
if ($ot eq 'array')
{ push @$output, $x->{buff} }
elsif ($ot eq 'hash')
{ $output->{$input} = $x->{buff} }
my $buff = '';
$x->{buff} = \$buff;
}
last if $status < 0 || $z->smartEof();
last
unless *$self->{MultiStream};
$status = $z->nextStream();
last
unless $status == 1 ;
}
return $z->closeError(undef)
if $status < 0 ;
${ *$self->{TrailingData} } = $z->trailingData()
if defined *$self->{TrailingData} ;
$z->close()
or return undef ;
return 1 ;
}
sub TIEHANDLE
{
return $_[0] if ref($_[0]);
die "OOPS\n" ;
}
sub UNTIE
{
my $self = shift ;
}
sub getHeaderInfo
{
my $self = shift ;
wantarray ? @{ *$self->{InfoList} } : *$self->{Info};
}
sub readBlock
{
my $self = shift ;
my $buff = shift ;
my $size = shift ;
if (defined *$self->{CompressedInputLength}) {
if (*$self->{CompressedInputLengthRemaining} == 0) {
delete *$self->{CompressedInputLength};
*$self->{CompressedInputLengthDone} = 1;
return STATUS_OK ;
}
$size = List::Util::min($size, *$self->{CompressedInputLengthRemaining} );
*$self->{CompressedInputLengthRemaining} -= $size ;
}
my $status = $self->smartRead($buff, $size) ;
return $self->saveErrorString(STATUS_ERROR, "Error Reading Data: $!", $!)
if $status == STATUS_ERROR ;
if ($status == 0 ) {
*$self->{Closed} = 1 ;
*$self->{EndStream} = 1 ;
return $self->saveErrorString(STATUS_ERROR, "unexpected end of file", STATUS_ERROR);
}
return STATUS_OK;
}
sub postBlockChk
{
return STATUS_OK;
}
sub _raw_read
{
# return codes
# >0 - ok, number of bytes read
# =0 - ok, eof
# <0 - not ok
my $self = shift ;
return G_EOF if *$self->{Closed} ;
return G_EOF if *$self->{EndStream} ;
my $buffer = shift ;
my $scan_mode = shift ;
if (*$self->{Plain}) {
my $tmp_buff ;
my $len = $self->smartRead(\$tmp_buff, *$self->{BlockSize}) ;
return $self->saveErrorString(G_ERR, "Error reading data: $!", $!)
if $len == STATUS_ERROR ;
if ($len == 0 ) {
*$self->{EndStream} = 1 ;
}
else {
*$self->{PlainBytesRead} += $len ;
$$buffer .= $tmp_buff;
}
return $len ;
}
if (*$self->{NewStream}) {
$self->gotoNextStream() > 0
or return G_ERR;
# For the headers that actually uncompressed data, put the
# uncompressed data into the output buffer.
$$buffer .= *$self->{Pending} ;
my $len = length *$self->{Pending} ;
*$self->{Pending} = '';
return $len;
}
my $temp_buf = '';
my $outSize = 0;
my $status = $self->readBlock(\$temp_buf, *$self->{BlockSize}, $outSize) ;
return G_ERR
if $status == STATUS_ERROR ;
my $buf_len = 0;
if ($status == STATUS_OK) {
my $beforeC_len = length $temp_buf;
my $before_len = defined $$buffer ? length $$buffer : 0 ;
$status = *$self->{Uncomp}->uncompr(\$temp_buf, $buffer,
defined *$self->{CompressedInputLengthDone} ||
$self->smartEof(), $outSize);
# Remember the input buffer if it wasn't consumed completely
$self->pushBack($temp_buf) if *$self->{Uncomp}{ConsumesInput};
return $self->saveErrorString(G_ERR, *$self->{Uncomp}{Error}, *$self->{Uncomp}{ErrorNo})
if $self->saveStatus($status) == STATUS_ERROR;
$self->postBlockChk($buffer, $before_len) == STATUS_OK
or return G_ERR;
$buf_len = defined $$buffer ? length($$buffer) - $before_len : 0;
*$self->{CompSize}->add($beforeC_len - length $temp_buf) ;
*$self->{InflatedBytesRead} += $buf_len ;
*$self->{TotalInflatedBytesRead} += $buf_len ;
*$self->{UnCompSize}->add($buf_len) ;
$self->filterUncompressed($buffer, $before_len);
# if (*$self->{Encoding}) {
# use Encode ;
# *$self->{PendingDecode} .= substr($$buffer, $before_len) ;
# my $got = *$self->{Encoding}->decode(*$self->{PendingDecode}, Encode::FB_QUIET) ;
# substr($$buffer, $before_len) = $got;
# }
}
if ($status == STATUS_ENDSTREAM) {
*$self->{EndStream} = 1 ;
my $trailer;
my $trailer_size = *$self->{Info}{TrailerLength} ;
my $got = 0;
if (*$self->{Info}{TrailerLength})
{
$got = $self->smartRead(\$trailer, $trailer_size) ;
}
if ($got == $trailer_size) {
$self->chkTrailer($trailer) == STATUS_OK
or return G_ERR;
}
else {
return $self->TrailerError("trailer truncated. Expected " .
"$trailer_size bytes, got $got")
if *$self->{Strict};
$self->pushBack($trailer) ;
}
# TODO - if want file pointer, do it here
if (! $self->smartEof()) {
*$self->{NewStream} = 1 ;
if (*$self->{MultiStream}) {
*$self->{EndStream} = 0 ;
return $buf_len ;
}
}
}
# return the number of uncompressed bytes read
return $buf_len ;
}
sub reset
{
my $self = shift ;
return *$self->{Uncomp}->reset();
}
sub filterUncompressed
{
}
#sub isEndStream
#{
# my $self = shift ;
# return *$self->{NewStream} ||
# *$self->{EndStream} ;
#}
sub nextStream
{
my $self = shift ;
my $status = $self->gotoNextStream();
$status == 1
or return $status ;
*$self->{TotalInflatedBytesRead} = 0 ;
*$self->{LineNo} = $. = 0;
return 1;
}
sub gotoNextStream
{
my $self = shift ;
if (! *$self->{NewStream}) {
my $status = 1;
my $buffer ;
# TODO - make this more efficient if know the offset for the end of
# the stream and seekable
$status = $self->read($buffer)
while $status > 0 ;
return $status
if $status < 0;
}
*$self->{NewStream} = 0 ;
*$self->{EndStream} = 0 ;
*$self->{CompressedInputLengthDone} = undef ;
*$self->{CompressedInputLength} = undef ;
$self->reset();
*$self->{UnCompSize}->reset();
*$self->{CompSize}->reset();
my $magic = $self->ckMagic();
if ( ! defined $magic) {
if (! *$self->{Transparent} || $self->eof())
{
*$self->{EndStream} = 1 ;
return 0;
}
$self->clearError();
*$self->{Type} = 'plain';
*$self->{Plain} = 1;
$self->pushBack(*$self->{HeaderPending}) ;
}
else
{
*$self->{Info} = $self->readHeader($magic);
if ( ! defined *$self->{Info} ) {
*$self->{EndStream} = 1 ;
return -1;
}
}
push @{ *$self->{InfoList} }, *$self->{Info} ;
return 1;
}
sub streamCount
{
my $self = shift ;
return 1 if ! defined *$self->{InfoList};
return scalar @{ *$self->{InfoList} } ;
}
#sub read
#{
# my $status = myRead(@_);
# return undef if $status < 0;
# return $status;
#}
sub read
{
# return codes
# >0 - ok, number of bytes read
# =0 - ok, eof
# <0 - not ok
my $self = shift ;
if (defined *$self->{ReadStatus} ) {
my $status = *$self->{ReadStatus}[0];
$self->saveErrorString( @{ *$self->{ReadStatus} } );
delete *$self->{ReadStatus} ;
return $status ;
}
return G_EOF if *$self->{Closed} ;
my $buffer ;
if (ref $_[0] ) {
$self->croakError(*$self->{ClassName} . "::read: buffer parameter is read-only")
if Scalar::Util::readonly(${ $_[0] });
$self->croakError(*$self->{ClassName} . "::read: not a scalar reference $_[0]" )
unless ref $_[0] eq 'SCALAR' ;
$buffer = $_[0] ;
}
else {
$self->croakError(*$self->{ClassName} . "::read: buffer parameter is read-only")
if Scalar::Util::readonly($_[0]);
$buffer = \$_[0] ;
}
my $length = $_[1] ;
my $offset = $_[2] || 0;
if (! *$self->{AppendOutput}) {
if (! $offset) {
$$buffer = '' ;
}
else {
if ($offset > length($$buffer)) {
$$buffer .= "\x00" x ($offset - length($$buffer));
}
else {
substr($$buffer, $offset) = '';
}
}
}
elsif (! defined $$buffer) {
$$buffer = '' ;
}
return G_EOF if !length *$self->{Pending} && *$self->{EndStream} ;
# the core read will return 0 if asked for 0 bytes
return 0 if defined $length && $length == 0 ;
$length = $length || 0;
$self->croakError(*$self->{ClassName} . "::read: length parameter is negative")
if $length < 0 ;
# Short-circuit if this is a simple read, with no length
# or offset specified.
unless ( $length || $offset) {
if (length *$self->{Pending}) {
$$buffer .= *$self->{Pending} ;
my $len = length *$self->{Pending};
*$self->{Pending} = '' ;
return $len ;
}
else {
my $len = 0;
$len = $self->_raw_read($buffer)
while ! *$self->{EndStream} && $len == 0 ;
return $len ;
}
}
# Need to jump through more hoops - either length or offset
# or both are specified.
my $out_buffer = *$self->{Pending} ;
*$self->{Pending} = '';
while (! *$self->{EndStream} && length($out_buffer) < $length)
{
my $buf_len = $self->_raw_read(\$out_buffer);
return $buf_len
if $buf_len < 0 ;
}
$length = length $out_buffer
if length($out_buffer) < $length ;
return 0
if $length == 0 ;
$$buffer = ''
if ! defined $$buffer;
$offset = length $$buffer
if *$self->{AppendOutput} ;
*$self->{Pending} = $out_buffer;
$out_buffer = \*$self->{Pending} ;
substr($$buffer, $offset) = substr($$out_buffer, 0, $length) ;
substr($$out_buffer, 0, $length) = '' ;
return $length ;
}
sub _getline
{
my $self = shift ;
my $status = 0 ;
# Slurp Mode
if ( ! defined $/ ) {
my $data ;
1 while ($status = $self->read($data)) > 0 ;
return ($status, \$data);
}
# Record Mode
if ( ref $/ eq 'SCALAR' && ${$/} =~ /^\d+$/ && ${$/} > 0) {
my $reclen = ${$/} ;
my $data ;
$status = $self->read($data, $reclen) ;
return ($status, \$data);
}
# Paragraph Mode
if ( ! length $/ ) {
my $paragraph ;
while (($status = $self->read($paragraph)) > 0 ) {
if ($paragraph =~ s/^(.*?\n\n+)//s) {
*$self->{Pending} = $paragraph ;
my $par = $1 ;
return (1, \$par);
}
}
return ($status, \$paragraph);
}
# $/ isn't empty, or a reference, so it's Line Mode.
{
my $line ;
my $p = \*$self->{Pending} ;
while (($status = $self->read($line)) > 0 ) {
my $offset = index($line, $/);
if ($offset >= 0) {
my $l = substr($line, 0, $offset + length $/ );
substr($line, 0, $offset + length $/) = '';
$$p = $line;
return (1, \$l);
}
}
return ($status, \$line);
}
}
sub getline
{
my $self = shift;
if (defined *$self->{ReadStatus} ) {
$self->saveErrorString( @{ *$self->{ReadStatus} } );
delete *$self->{ReadStatus} ;
return undef;
}
return undef
if *$self->{Closed} || (!length *$self->{Pending} && *$self->{EndStream}) ;
my $current_append = *$self->{AppendOutput} ;
*$self->{AppendOutput} = 1;
my ($status, $lineref) = $self->_getline();
*$self->{AppendOutput} = $current_append;
return undef
if $status < 0 || length $$lineref == 0 ;
$. = ++ *$self->{LineNo} ;
return $$lineref ;
}
sub getlines
{
my $self = shift;
$self->croakError(*$self->{ClassName} .
"::getlines: called in scalar context\n") unless wantarray;
my($line, @lines);
push(@lines, $line)
while defined($line = $self->getline);
return @lines;
}
sub READLINE
{
goto &getlines if wantarray;
goto &getline;
}
sub getc
{
my $self = shift;
my $buf;
return $buf if $self->read($buf, 1);
return undef;
}
sub ungetc
{
my $self = shift;
*$self->{Pending} = "" unless defined *$self->{Pending} ;
*$self->{Pending} = $_[0] . *$self->{Pending} ;
}
sub trailingData
{
my $self = shift ;
if (defined *$self->{FH} || defined *$self->{InputEvent} ) {
return *$self->{Prime} ;
}
else {
my $buf = *$self->{Buffer} ;
my $offset = *$self->{BufferOffset} ;
return substr($$buf, $offset) ;
}
}
sub eof
{
my $self = shift ;
return (*$self->{Closed} ||
(!length *$self->{Pending}
&& ( $self->smartEof() || *$self->{EndStream}))) ;
}
sub tell
{
my $self = shift ;
my $in ;
if (*$self->{Plain}) {
$in = *$self->{PlainBytesRead} ;
}
else {
$in = *$self->{TotalInflatedBytesRead} ;
}
my $pending = length *$self->{Pending} ;
return 0 if $pending > $in ;
return $in - $pending ;
}
sub close
{
# todo - what to do if close is called before the end of the gzip file
# do we remember any trailing data?
my $self = shift ;
return 1 if *$self->{Closed} ;
untie *$self
if $] >= 5.008 ;
my $status = 1 ;
if (defined *$self->{FH}) {
if ((! *$self->{Handle} || *$self->{AutoClose}) && ! *$self->{StdIO}) {
local $.;
$! = 0 ;
$status = *$self->{FH}->close();
return $self->saveErrorString(0, $!, $!)
if !*$self->{InNew} && $self->saveStatus($!) != 0 ;
}
delete *$self->{FH} ;
$! = 0 ;
}
*$self->{Closed} = 1 ;
return 1;
}
sub DESTROY
{
my $self = shift ;
local ($., $@, $!, $^E, $?);
$self->close() ;
}
sub seek
{
my $self = shift ;
my $position = shift;
my $whence = shift ;
my $here = $self->tell() ;
my $target = 0 ;
if ($whence == SEEK_SET) {
$target = $position ;
}
elsif ($whence == SEEK_CUR) {
$target = $here + $position ;
}
elsif ($whence == SEEK_END) {
$target = $position ;
$self->croakError(*$self->{ClassName} . "::seek: SEEK_END not allowed") ;
}
else {
$self->croakError(*$self->{ClassName} ."::seek: unknown value, $whence, for whence parameter");
}
# short circuit if seeking to current offset
if ($target == $here) {
# On ordinary filehandles, seeking to the current
# position also clears the EOF condition, so we
# emulate this behavior locally while simultaneously
# cascading it to the underlying filehandle
if (*$self->{Plain}) {
*$self->{EndStream} = 0;
seek(*$self->{FH},0,1) if *$self->{FH};
}
return 1;
}
# Outlaw any attempt to seek backwards
$self->croakError( *$self->{ClassName} ."::seek: cannot seek backwards")
if $target < $here ;
# Walk the file to the new offset
my $offset = $target - $here ;
my $got;
while (($got = $self->read(my $buffer, List::Util::min($offset, *$self->{BlockSize})) ) > 0)
{
$offset -= $got;
last if $offset == 0 ;
}
$here = $self->tell() ;
return $offset == 0 ? 1 : 0 ;
}
sub fileno
{
my $self = shift ;
return defined *$self->{FH}
? fileno *$self->{FH}
: undef ;
}
sub binmode
{
1;
# my $self = shift ;
# return defined *$self->{FH}
# ? binmode *$self->{FH}
# : 1 ;
}
sub opened
{
my $self = shift ;
return ! *$self->{Closed} ;
}
sub autoflush
{
my $self = shift ;
return defined *$self->{FH}
? *$self->{FH}->autoflush(@_)
: undef ;
}
sub input_line_number
{
my $self = shift ;
my $last = *$self->{LineNo};
$. = *$self->{LineNo} = $_[1] if @_ ;
return $last;
}
*BINMODE = \&binmode;
*SEEK = \&seek;
*READ = \&read;
*sysread = \&read;
*TELL = \&tell;
*EOF = \&eof;
*FILENO = \&fileno;
*CLOSE = \&close;
sub _notAvailable
{
my $name = shift ;
return sub { croak "$name Not Available: File opened only for intput" ; } ;
}
*print = _notAvailable('print');
*PRINT = _notAvailable('print');
*printf = _notAvailable('printf');
*PRINTF = _notAvailable('printf');
*write = _notAvailable('write');
*WRITE = _notAvailable('write');
#*sysread = \&read;
#*syswrite = \&_notAvailable;
package IO::Uncompress::Base ;
1 ;
__END__
=head1 NAME
IO::Uncompress::Base - Base Class for IO::Uncompress modules
=head1 SYNOPSIS
use IO::Uncompress::Base ;
=head1 DESCRIPTION
This module is not intended for direct use in application code. Its sole
purpose is to be sub-classed by IO::Uncompress modules.
=head1 SEE ALSO
L<Compress::Zlib>, L<IO::Compress::Gzip>, L<IO::Uncompress::Gunzip>, L<IO::Compress::Deflate>, L<IO::Uncompress::Inflate>, L<IO::Compress::RawDeflate>, L<IO::Uncompress::RawInflate>, L<IO::Compress::Bzip2>, L<IO::Uncompress::Bunzip2>, L<IO::Compress::Lzma>, L<IO::Uncompress::UnLzma>, L<IO::Compress::Xz>, L<IO::Uncompress::UnXz>, L<IO::Compress::Lzop>, L<IO::Uncompress::UnLzop>, L<IO::Compress::Lzf>, L<IO::Uncompress::UnLzf>, L<IO::Uncompress::AnyInflate>, L<IO::Uncompress::AnyUncompress>
L<IO::Compress::FAQ|IO::Compress::FAQ>
L<File::GlobMapper|File::GlobMapper>, L<Archive::Zip|Archive::Zip>,
L<Archive::Tar|Archive::Tar>,
L<IO::Zlib|IO::Zlib>
=head1 AUTHOR
This module was written by Paul Marquess, C<pmqs@cpan.org>.
=head1 MODIFICATION HISTORY
See the Changes file.
=head1 COPYRIGHT AND LICENSE
Copyright (c) 2005-2018 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or
modify it under the same terms as Perl itself.