Your IP : 18.227.46.87


Current Path : /usr/lib/kbd/keymaps/legacy/i386/qwerty/
Upload File :
Current File : //usr/lib/kbd/keymaps/legacy/i386/qwerty/hypermap.m4

#
# hypermap.map 1994/11/11
# Michael Shields <shields@tembel.org>
#
# A keymap redesigned for sanity.
#

#
# This keymap is a ground-up reimplementation of the keyboard map,
# intended to be consistent and rational.  It uses an m4 metalanguage to
# declare the key mappings.  Usage is `m4 hypermap.map | loadkeys'.
#
# The modifier flags used are `shift' (1), `control' (4), and `alt' (8).
# Left and right modifiers are not distinguished.
#
# In general, Meta is always distinguished, and M-S-KEY is distinct from
# M-KEY.  This is good news for Emacs users.  C-S-KEY is consistently
# folded into C-KEY.
#
# Shift is more loosely interpreted than the other modifiers; usually if
# S-KEY has no special meaning, the action will be the same as KEY.
# However, if M-KEY or H-KEY is undefined, nothing happens.
#
# Because Caps Lock's position is so out of proportion to its utility,
# it's been totally redefined to a new sort of modifier, which I've
# arbitrarily named `Hyper'.  Shift is ignored with Hyper.  Hyper
# provides dead keys:
#	H-`	dead accent grave
#	H-'	dead acute accent
#	H-^	dead circumflex
#	H-t	dead tilde
#	H-d	dead diaeresis
# and ISO-8859-1 symbols (some more mnemonic than others):
#	H-SPC	nobreakspace
#	H-!	inverted bang
#	H-h	cents (`hundredths')
#	H-#	pounds sterling
#	H-$	currency
#	H-y	yen
#	H-|	broken bar
#	H-s	section (the galaxy symbol)
#	H-c	copyright
#	H-a	feminine ordinal
#	H-<	left guillemot
#	H-]	not sign (it's angular)
#	H--	soft hyphen
#	H-r	registered trademark symbol
#	H-=	macron
#	H-0	degrees
#	H-[	plus/minus (near + and -)
#	H-k	superior 2 (jkl form a series)
#	H-l	superior 3
#	H-u	mu
#	H-p	pilcrow
#	H-:	centered dot
#	H-j	superior 1
#	H-o	masculine ordinal
#	H->	right guillemot
#	H-q	1/4 fraction (qwe form a series)
#	H-w	1/2 fraction
#	H-e	3/4 fraction
#	H-?	inverted question mark
#	H-x	multiplication symbol
#	H-%	division symbol
# You can also use Hyper plus Alt to type characters by decimal code on
# the keypad, as with Alt alone, or in hex on the main keyboard.  And
# H-TAB is a Caps Lock.
#
# Function keys work as marked, unless with Alt, in which case they
# switch to the console with the same number.  Shift adds 12 and Hyper
# adds 24 to the numbers (i.e., they logically switch to other banks).
# Thus you can easily address up to 48.  Control is ignored, for
# consistency with X.
#
# Finally, you can change the behavior of the Caps Lock and Controls
# with m4 command-line options.  The default values are equivalent to
# `-DCAPSLOCK_K=Hyper -DLEFTCTRL_K=Control -DRIGHTCTRL_K=Control'.  You
# can remove the Hyper code entirely with `-DCAPSLOCK_K=Caps_Lock'.
#
# This file is arranged vaguely by key position on the classic PC layout.
#


dnl Set default values.
ifdef(`CAPSLOCK_K', , `define(`CAPSLOCK_K', `Hyper')')
ifdef(`LEFTCTRL_K', , `define(`LEFTCTRL_K', `Control')')
ifdef(`RIGHTCTRL_K', , `define(`RIGHTCTRL_K', `Control')')

dnl Figure out if any key is a Hyper key.  If so, define `hyper', both
dnl for usefulness and `ifdef' testability.
ifelse(CAPSLOCK_K, `Hyper', `define(`hyper', `ctrlr')',
       LEFTCTRL_K, `Hyper', `define(`hyper', `ctrlr')',
       RIGHTCTRL_K, `Hyper', `define(`hyper', `ctrlr')')

define(`Hyper', `CtrlR')


keymaps 0,1,4,5,8,9,12,13`'ifdef(`hyper', `,128,129,132,133,136,137,140,141')


dnl General usage of these macros is MACRO(KEYCODE, UNSHIFTED, SHIFTED).

dnl We first undefine `shift', which only causes problems.
undefine(`shift')

define(`SIMPLE', `keycode $1 = $2 $2')

define(`KEY',
`			keycode $1 = $2 VoidSymbol
shift			keycode $1 = $3
		alt	keycode $1 = Meta_$2
shift		alt	keycode $1 = Meta_$3')

dnl This macro adds Control variations to a key.
define(`CONTROL',
`	control		keycode $1 = $2
shift	control		keycode $1 = $2
	control	alt	keycode $1 = Meta_$2
shift	control	alt	keycode $1 = Meta_$2')

dnl Add Hyper variations to a key.
define(`HYPER', ifdef(`hyper',
`			hyper	keycode $1 = $2
shift			hyper	keycode $1 = $2'))
define(`CONTROLHYPER', ifdef(`hyper',
`	control		hyper	keycode $1 = $2
shift	control		hyper	keycode $1 = $2'))
define(`METAHYPER', ifdef(`hyper',
`		alt	hyper	keycode $1 = $2
shift		alt	hyper	keycode $1 = $2'))
define(`CONTROLMETAHYPER', ifdef(`hyper', dnl Ludicrous.
`	control	alt	hyper	keycode $1 = $2
shift	control	alt	hyper	keycode $1 = $2'))

dnl Special case for letters.  Best to be explicit.
define(`LETTER',
`			keycode $1 = `+'$2 VoidSymbol
shift			keycode $1 = `+'translit($2, `a-z', `A-Z')
		alt	keycode $1 = `Meta_'$2
shift		alt	keycode $1 = `Meta_'translit($2, `a-z', `A-Z')
CONTROL($1, Control_$2)')

dnl For function keys.  Call here is FUNCTION(KEYCODE, FKEYNUM).
define(`BANKSIZE', 12)
define(`FUNCTION',
`			keycode $1 = `F'$2 VoidSymbol
shift			keycode $1 = `F'eval($2 + BANKSIZE)
	hyper		keycode $1 = `F'eval($2 + BANKSIZE * 2)
shift	hyper		keycode $1 = `F'eval($2 + BANKSIZE * 3)
		alt	keycode $1 = `Console_'$2
shift		alt	keycode $1 = `Console_'eval($2 + BANKSIZE)
	hyper	alt	keycode $1 = `Console_'eval($2 + BANKSIZE * 2)
shift	hyper	alt	keycode $1 = `Console_'eval($2 + BANKSIZE * 3)')

dnl For the keypad digits.  KPDIGIT(KEYCODE, DIGIT).
define(`KPDIGIT',
`			keycode $1 = KP_$2 VoidSymbol
shift			keycode $1 = KP_$2
		alt	keycode $1 = Ascii_$2
shift		alt	keycode $1 = Ascii_$2
METAHYPER($1, Ascii_$2)')

dnl And a special approximation:
define(`Meta_Return', `Meta_Control_m')


KEY(1, Escape, Escape)

FUNCTION(59, 1)
FUNCTION(60, 2)
FUNCTION(61, 3)
FUNCTION(62, 4)
FUNCTION(63, 5)
FUNCTION(64, 6)
FUNCTION(65, 7)
FUNCTION(66, 8)
FUNCTION(67, 9)
FUNCTION(68, 10)
FUNCTION(87, 11)
FUNCTION(88, 12)

KEY(2, one, exclam)
    HYPER(2, exclamdown)
    METAHYPER(2, Hex_1)
KEY(3, two, at)
    CONTROL(3, nul)
    METAHYPER(3, Hex_2)
KEY(4, three, numbersign)
    HYPER(4, pound)
    METAHYPER(4, Hex_3)
KEY(5, four, dollar)
    HYPER(5, currency)
    METAHYPER(5, Hex_4)
KEY(6, five, percent)
    HYPER(6, division)
    METAHYPER(6, Hex_5)
KEY(7, six, asciicircum)
    CONTROL(7, Control_asciicircum)
    HYPER(7, dead_circumflex)
    METAHYPER(7, Hex_6)
KEY(8, seven, ampersand)
    METAHYPER(8, Hex_7)
KEY(9, eight, asterisk)
    METAHYPER(9, Hex_8)
KEY(10, nine, parenleft)
    METAHYPER(10, Hex_9)
KEY(11, zero, parenright)
    HYPER(11, degree)
    METAHYPER(11, Hex_0)
KEY(12, minus, underscore)
    CONTROL(12, Control_underscore)
    HYPER(12, hyphen)
KEY(13, equal, plus)
    HYPER(13, macron)
KEY(14, Delete, Delete)
    CONTROL(14, BackSpace)

KEY(15, Tab, Tab)
    HYPER(15, Caps_Lock)
LETTER(16, q)
    HYPER(16, onequarter)
LETTER(17, w)
    HYPER(17, onehalf)
LETTER(18, e)
    HYPER(18, threequarters)
    METAHYPER(18, Hex_E)
LETTER(19, r)
    HYPER(19, registered)
LETTER(20, t)
    HYPER(20, dead_tilde)
LETTER(21, y)
    HYPER(21, yen)
LETTER(22, u)
    HYPER(22, mu)
LETTER(23, i)
LETTER(24, o)
    HYPER(24, masculine)
LETTER(25, p)
    HYPER(25, 182) # pilcrow
KEY(26, bracketleft, braceleft)
    CONTROL(26, Escape)
    HYPER(26, plusminus)
KEY(27, bracketright, braceright)
    CONTROL(27, Control_bracketright)
    HYPER(27, notsign)

KEY(28, Return, Return)

LETTER(30, a)
    HYPER(30, ordfeminine)
    METAHYPER(30, Hex_A)
LETTER(31, s)
    HYPER(31, section)
LETTER(32, d)
    HYPER(32, dead_diaeresis)
    METAHYPER(32, Hex_D)
LETTER(33, f)
    METAHYPER(33, Hex_F)
LETTER(34, g)
LETTER(35, h)
    HYPER(35, cent)
LETTER(36, j)
    HYPER(36, onesuperior)
LETTER(37, k)
    HYPER(37, twosuperior)
LETTER(38, l)
    HYPER(38, threesuperior)
KEY(39, semicolon, colon)
    HYPER(39, periodcentered)
KEY(40, apostrophe, quotedbl)
    HYPER(40, dead_acute)
KEY(41, grave, asciitilde)
    HYPER(41, dead_grave)

KEY(43, backslash, bar)
    CONTROL(43, Control_backslash)
    HYPER(43, brokenbar)
LETTER(44, z)
LETTER(45, x)
    HYPER(45, multiplication)
LETTER(46, c)
    HYPER(46, copyright)
    METAHYPER(46, Hex_C)
LETTER(47, v)
LETTER(48, b)
    METAHYPER(48, Hex_B)
LETTER(49, n)
LETTER(50, m)
KEY(51, comma, less)
    HYPER(51, guillemotleft)
KEY(52, period, greater)
    HYPER(52, guillemotright)
KEY(53, slash, question)
    HYPER(53, questiondown)

KEY(57, space, space)
    CONTROL(57, nul)
    HYPER(57, nobreakspace)

KPDIGIT(71, 7)
KPDIGIT(72, 8)
KPDIGIT(73, 9)
SIMPLE(74, KP_Subtract)
KPDIGIT(75, 4)
KPDIGIT(76, 5)
KPDIGIT(77, 6)
SIMPLE(78, KP_Add)
KPDIGIT(79, 1)
KPDIGIT(80, 2)
KPDIGIT(81, 3)
KPDIGIT(82, 0)
SIMPLE(83, KP_Period)
SIMPLE(96, KP_Enter)
SIMPLE(98, KP_Divide)
SIMPLE(55, KP_Multiply)
SIMPLE(118, KP_MinPlus)

# Modifiers.
keycode  42 = Shift
keycode  54 = Shift
keycode  56 = Alt
keycode 100 = Alt
keycode  58 = CAPSLOCK_K
keycode  29 = LEFTCTRL_K
keycode  97 = RIGHTCTRL_K

# Everyone needs a compose key.  This is C-..
control	keycode  52 = Compose

SIMPLE(69, Num_Lock)

keycode  70 = Scroll_Lock
	shift	keycode  70 = Show_Memory
	control	keycode  70 = Show_State
	alt	keycode  70 = Show_Registers

# SysRq.  I suppose there's some reason it's ^\.
SIMPLE(99, Control_backslash)

SIMPLE(119, Pause)
# Ctrl-Break seems to have low-level hardware behind it.
SIMPLE(101, Break)

SIMPLE(110, Insert)
SIMPLE(102, Find)
keycode 104 = Prior Scroll_Backward
SIMPLE(111, Remove)
SIMPLE(107, Select)
keycode 109 = Next Scroll_Forward

SIMPLE(103, Up)
SIMPLE(105, Left)
alt keycode 105 = Decr_Console
SIMPLE(106, Right)
alt keycode 106 = Incr_Console
SIMPLE(108, Down)

control	alt keycode  83 = Boot
control	alt keycode 111 = Boot


# Stock VT102 string definitions.
string F1 = "\033[[A"
string F2 = "\033[[B"
string F3 = "\033[[C"
string F4 = "\033[[D"
string F5 = "\033[[E"
string F6 = "\033[17~"
string F7 = "\033[18~"
string F8 = "\033[19~"
string F9 = "\033[20~"
string F10 = "\033[21~"
string F11 = "\033[23~"
string F12 = "\033[24~"
string F13 = "\033[25~"
string F14 = "\033[26~"
string F15 = "\033[28~"
string F16 = "\033[29~"
string F17 = "\033[31~"
string F18 = "\033[32~"
string F19 = "\033[33~"
string F20 = "\033[34~"
string Find = "\033[1~"
string Insert = "\033[2~"
string Remove = "\033[3~"
string Select = "\033[4~"
string Prior = "\033[5~"
string Next = "\033[6~"
string Macro = "\033[M"
string Pause = "\033[P"

# Stock ISO-8859-1 compositions.
changequote()dnl
compose '`' 'A' to '�'
compose '`' 'a' to '�'
compose '\'' 'A' to '�'
compose '\'' 'a' to '�'
compose '^' 'A' to '�'
compose '^' 'a' to '�'
compose '~' 'A' to '�'
compose '~' 'a' to '�'
compose '"' 'A' to '�'
compose '"' 'a' to '�'
compose 'O' 'A' to '�'
compose 'o' 'a' to '�'
compose '0' 'A' to '�'
compose '0' 'a' to '�'
compose 'A' 'A' to '�'
compose 'a' 'a' to '�'
compose 'A' 'E' to '�'
compose 'a' 'e' to '�'
compose ',' 'C' to '�'
compose ',' 'c' to '�'
compose '`' 'E' to '�'
compose '`' 'e' to '�'
compose '\'' 'E' to '�'
compose '\'' 'e' to '�'
compose '^' 'E' to '�'
compose '^' 'e' to '�'
compose '"' 'E' to '�'
compose '"' 'e' to '�'
compose '`' 'I' to '�'
compose '`' 'i' to '�'
compose '\'' 'I' to '�'
compose '\'' 'i' to '�'
compose '^' 'I' to '�'
compose '^' 'i' to '�'
compose '"' 'I' to '�'
compose '"' 'i' to '�'
compose '-' 'D' to '�'
compose '-' 'd' to '�'
compose '~' 'N' to '�'
compose '~' 'n' to '�'
compose '`' 'O' to '�'
compose '`' 'o' to '�'
compose '\'' 'O' to '�'
compose '\'' 'o' to '�'
compose '^' 'O' to '�'
compose '^' 'o' to '�'
compose '~' 'O' to '�'
compose '~' 'o' to '�'
compose '"' 'O' to '�'
compose '"' 'o' to '�'
compose '/' 'O' to '�'
compose '/' 'o' to '�'
compose '`' 'U' to '�'
compose '`' 'u' to '�'
compose '\'' 'U' to '�'
compose '\'' 'u' to '�'
compose '^' 'U' to '�'
compose '^' 'u' to '�'
compose '"' 'U' to '�'
compose '"' 'u' to '�'
compose '\'' 'Y' to '�'
compose '\'' 'y' to '�'
compose 'T' 'H' to '�'
compose 't' 'h' to '�'
compose 's' 's' to '�'
compose '"' 'y' to '�'
compose 's' 'z' to '�'
compose 'i' 'j' to '�'

# ISO-8859-3 compositions for Esperanto.
compose 'C' 'x' to '�' #198
compose 'G' 'x' to '�' #216
compose 'H' 'x' to '�' #166
compose 'J' 'x' to '�' #172
compose 'S' 'x' to '�' #222
compose 'U' 'x' to '�' #221
compose 'c' 'x' to '�' #230
compose 'g' 'x' to '�' #248
compose 'h' 'x' to '�' #182
compose 'j' 'x' to '�' #188
compose 's' 'x' to '�' #254
compose 'u' 'x' to '�' #253

?>