Your IP : 18.222.179.96
from __future__ import annotations
import re
import typing
from ..exceptions import LocationParseError
from .util import to_str
# We only want to normalize urls with an HTTP(S) scheme.
# urllib3 infers URLs without a scheme (None) to be http.
_NORMALIZABLE_SCHEMES = ("http", "https", None)
# Almost all of these patterns were derived from the
# 'rfc3986' module: https://github.com/python-hyper/rfc3986
_PERCENT_RE = re.compile(r"%[a-fA-F0-9]{2}")
_SCHEME_RE = re.compile(r"^(?:[a-zA-Z][a-zA-Z0-9+-]*:|/)")
_URI_RE = re.compile(
r"^(?:([a-zA-Z][a-zA-Z0-9+.-]*):)?"
r"(?://([^\\/?#]*))?"
r"([^?#]*)"
r"(?:\?([^#]*))?"
r"(?:#(.*))?$",
re.UNICODE | re.DOTALL,
)
_IPV4_PAT = r"(?:[0-9]{1,3}\.){3}[0-9]{1,3}"
_HEX_PAT = "[0-9A-Fa-f]{1,4}"
_LS32_PAT = "(?:{hex}:{hex}|{ipv4})".format(hex=_HEX_PAT, ipv4=_IPV4_PAT)
_subs = {"hex": _HEX_PAT, "ls32": _LS32_PAT}
_variations = [
# 6( h16 ":" ) ls32
"(?:%(hex)s:){6}%(ls32)s",
# "::" 5( h16 ":" ) ls32
"::(?:%(hex)s:){5}%(ls32)s",
# [ h16 ] "::" 4( h16 ":" ) ls32
"(?:%(hex)s)?::(?:%(hex)s:){4}%(ls32)s",
# [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
"(?:(?:%(hex)s:)?%(hex)s)?::(?:%(hex)s:){3}%(ls32)s",
# [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
"(?:(?:%(hex)s:){0,2}%(hex)s)?::(?:%(hex)s:){2}%(ls32)s",
# [ *3( h16 ":" ) h16 ] "::" h16 ":" ls32
"(?:(?:%(hex)s:){0,3}%(hex)s)?::%(hex)s:%(ls32)s",
# [ *4( h16 ":" ) h16 ] "::" ls32
"(?:(?:%(hex)s:){0,4}%(hex)s)?::%(ls32)s",
# [ *5( h16 ":" ) h16 ] "::" h16
"(?:(?:%(hex)s:){0,5}%(hex)s)?::%(hex)s",
# [ *6( h16 ":" ) h16 ] "::"
"(?:(?:%(hex)s:){0,6}%(hex)s)?::",
]
_UNRESERVED_PAT = r"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789._\-~"
_IPV6_PAT = "(?:" + "|".join([x % _subs for x in _variations]) + ")"
_ZONE_ID_PAT = "(?:%25|%)(?:[" + _UNRESERVED_PAT + "]|%[a-fA-F0-9]{2})+"
_IPV6_ADDRZ_PAT = r"\[" + _IPV6_PAT + r"(?:" + _ZONE_ID_PAT + r")?\]"
_REG_NAME_PAT = r"(?:[^\[\]%:/?#]|%[a-fA-F0-9]{2})*"
_TARGET_RE = re.compile(r"^(/[^?#]*)(?:\?([^#]*))?(?:#.*)?$")
_IPV4_RE = re.compile("^" + _IPV4_PAT + "$")
_IPV6_RE = re.compile("^" + _IPV6_PAT + "$")
_IPV6_ADDRZ_RE = re.compile("^" + _IPV6_ADDRZ_PAT + "$")
_BRACELESS_IPV6_ADDRZ_RE = re.compile("^" + _IPV6_ADDRZ_PAT[2:-2] + "$")
_ZONE_ID_RE = re.compile("(" + _ZONE_ID_PAT + r")\]$")
_HOST_PORT_PAT = ("^(%s|%s|%s)(?::0*?(|0|[1-9][0-9]{0,4}))?$") % (
_REG_NAME_PAT,
_IPV4_PAT,
_IPV6_ADDRZ_PAT,
)
_HOST_PORT_RE = re.compile(_HOST_PORT_PAT, re.UNICODE | re.DOTALL)
_UNRESERVED_CHARS = set(
"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789._-~"
)
_SUB_DELIM_CHARS = set("!$&'()*+,;=")
_USERINFO_CHARS = _UNRESERVED_CHARS | _SUB_DELIM_CHARS | {":"}
_PATH_CHARS = _USERINFO_CHARS | {"@", "/"}
_QUERY_CHARS = _FRAGMENT_CHARS = _PATH_CHARS | {"?"}
class Url(
typing.NamedTuple(
"Url",
[
("scheme", typing.Optional[str]),
("auth", typing.Optional[str]),
("host", typing.Optional[str]),
("port", typing.Optional[int]),
("path", typing.Optional[str]),
("query", typing.Optional[str]),
("fragment", typing.Optional[str]),
],
)
):
"""
Data structure for representing an HTTP URL. Used as a return value for
:func:`parse_url`. Both the scheme and host are normalized as they are
both case-insensitive according to RFC 3986.
"""
def __new__( # type: ignore[no-untyped-def]
cls,
scheme: str | None = None,
auth: str | None = None,
host: str | None = None,
port: int | None = None,
path: str | None = None,
query: str | None = None,
fragment: str | None = None,
):
if path and not path.startswith("/"):
path = "/" + path
if scheme is not None:
scheme = scheme.lower()
return super().__new__(cls, scheme, auth, host, port, path, query, fragment)
@property
def hostname(self) -> str | None:
"""For backwards-compatibility with urlparse. We're nice like that."""
return self.host
@property
def request_uri(self) -> str:
"""Absolute path including the query string."""
uri = self.path or "/"
if self.query is not None:
uri += "?" + self.query
return uri
@property
def authority(self) -> str | None:
"""
Authority component as defined in RFC 3986 3.2.
This includes userinfo (auth), host and port.
i.e.
userinfo@host:port
"""
userinfo = self.auth
netloc = self.netloc
if netloc is None or userinfo is None:
return netloc
else:
return f"{userinfo}@{netloc}"
@property
def netloc(self) -> str | None:
"""
Network location including host and port.
If you need the equivalent of urllib.parse's ``netloc``,
use the ``authority`` property instead.
"""
if self.host is None:
return None
if self.port:
return f"{self.host}:{self.port}"
return self.host
@property
def url(self) -> str:
"""
Convert self into a url
This function should more or less round-trip with :func:`.parse_url`. The
returned url may not be exactly the same as the url inputted to
:func:`.parse_url`, but it should be equivalent by the RFC (e.g., urls
with a blank port will have : removed).
Example:
.. code-block:: python
import urllib3
U = urllib3.util.parse_url("https://google.com/mail/")
print(U.url)
# "https://google.com/mail/"
print( urllib3.util.Url("https", "username:password",
"host.com", 80, "/path", "query", "fragment"
).url
)
# "https://username:password@host.com:80/path?query#fragment"
"""
scheme, auth, host, port, path, query, fragment = self
url = ""
# We use "is not None" we want things to happen with empty strings (or 0 port)
if scheme is not None:
url += scheme + "://"
if auth is not None:
url += auth + "@"
if host is not None:
url += host
if port is not None:
url += ":" + str(port)
if path is not None:
url += path
if query is not None:
url += "?" + query
if fragment is not None:
url += "#" + fragment
return url
def __str__(self) -> str:
return self.url
@typing.overload
def _encode_invalid_chars(
component: str, allowed_chars: typing.Container[str]
) -> str: # Abstract
...
@typing.overload
def _encode_invalid_chars(
component: None, allowed_chars: typing.Container[str]
) -> None: # Abstract
...
def _encode_invalid_chars(
component: str | None, allowed_chars: typing.Container[str]
) -> str | None:
"""Percent-encodes a URI component without reapplying
onto an already percent-encoded component.
"""
if component is None:
return component
component = to_str(component)
# Normalize existing percent-encoded bytes.
# Try to see if the component we're encoding is already percent-encoded
# so we can skip all '%' characters but still encode all others.
component, percent_encodings = _PERCENT_RE.subn(
lambda match: match.group(0).upper(), component
)
uri_bytes = component.encode("utf-8", "surrogatepass")
is_percent_encoded = percent_encodings == uri_bytes.count(b"%")
encoded_component = bytearray()
for i in range(0, len(uri_bytes)):
# Will return a single character bytestring
byte = uri_bytes[i : i + 1]
byte_ord = ord(byte)
if (is_percent_encoded and byte == b"%") or (
byte_ord < 128 and byte.decode() in allowed_chars
):
encoded_component += byte
continue
encoded_component.extend(b"%" + (hex(byte_ord)[2:].encode().zfill(2).upper()))
return encoded_component.decode()
def _remove_path_dot_segments(path: str) -> str:
# See http://tools.ietf.org/html/rfc3986#section-5.2.4 for pseudo-code
segments = path.split("/") # Turn the path into a list of segments
output = [] # Initialize the variable to use to store output
for segment in segments:
# '.' is the current directory, so ignore it, it is superfluous
if segment == ".":
continue
# Anything other than '..', should be appended to the output
if segment != "..":
output.append(segment)
# In this case segment == '..', if we can, we should pop the last
# element
elif output:
output.pop()
# If the path starts with '/' and the output is empty or the first string
# is non-empty
if path.startswith("/") and (not output or output[0]):
output.insert(0, "")
# If the path starts with '/.' or '/..' ensure we add one more empty
# string to add a trailing '/'
if path.endswith(("/.", "/..")):
output.append("")
return "/".join(output)
@typing.overload
def _normalize_host(host: None, scheme: str | None) -> None:
...
@typing.overload
def _normalize_host(host: str, scheme: str | None) -> str:
...
def _normalize_host(host: str | None, scheme: str | None) -> str | None:
if host:
if scheme in _NORMALIZABLE_SCHEMES:
is_ipv6 = _IPV6_ADDRZ_RE.match(host)
if is_ipv6:
# IPv6 hosts of the form 'a::b%zone' are encoded in a URL as
# such per RFC 6874: 'a::b%25zone'. Unquote the ZoneID
# separator as necessary to return a valid RFC 4007 scoped IP.
match = _ZONE_ID_RE.search(host)
if match:
start, end = match.span(1)
zone_id = host[start:end]
if zone_id.startswith("%25") and zone_id != "%25":
zone_id = zone_id[3:]
else:
zone_id = zone_id[1:]
zone_id = _encode_invalid_chars(zone_id, _UNRESERVED_CHARS)
return f"{host[:start].lower()}%{zone_id}{host[end:]}"
else:
return host.lower()
elif not _IPV4_RE.match(host):
return to_str(
b".".join([_idna_encode(label) for label in host.split(".")]),
"ascii",
)
return host
def _idna_encode(name: str) -> bytes:
if not name.isascii():
try:
import idna
except ImportError:
raise LocationParseError(
"Unable to parse URL without the 'idna' module"
) from None
try:
return idna.encode(name.lower(), strict=True, std3_rules=True)
except idna.IDNAError:
raise LocationParseError(
f"Name '{name}' is not a valid IDNA label"
) from None
return name.lower().encode("ascii")
def _encode_target(target: str) -> str:
"""Percent-encodes a request target so that there are no invalid characters
Pre-condition for this function is that 'target' must start with '/'.
If that is the case then _TARGET_RE will always produce a match.
"""
match = _TARGET_RE.match(target)
if not match: # Defensive:
raise LocationParseError(f"{target!r} is not a valid request URI")
path, query = match.groups()
encoded_target = _encode_invalid_chars(path, _PATH_CHARS)
if query is not None:
query = _encode_invalid_chars(query, _QUERY_CHARS)
encoded_target += "?" + query
return encoded_target
def parse_url(url: str) -> Url:
"""
Given a url, return a parsed :class:`.Url` namedtuple. Best-effort is
performed to parse incomplete urls. Fields not provided will be None.
This parser is RFC 3986 and RFC 6874 compliant.
The parser logic and helper functions are based heavily on
work done in the ``rfc3986`` module.
:param str url: URL to parse into a :class:`.Url` namedtuple.
Partly backwards-compatible with :mod:`urllib.parse`.
Example:
.. code-block:: python
import urllib3
print( urllib3.util.parse_url('http://google.com/mail/'))
# Url(scheme='http', host='google.com', port=None, path='/mail/', ...)
print( urllib3.util.parse_url('google.com:80'))
# Url(scheme=None, host='google.com', port=80, path=None, ...)
print( urllib3.util.parse_url('/foo?bar'))
# Url(scheme=None, host=None, port=None, path='/foo', query='bar', ...)
"""
if not url:
# Empty
return Url()
source_url = url
if not _SCHEME_RE.search(url):
url = "//" + url
scheme: str | None
authority: str | None
auth: str | None
host: str | None
port: str | None
port_int: int | None
path: str | None
query: str | None
fragment: str | None
try:
scheme, authority, path, query, fragment = _URI_RE.match(url).groups() # type: ignore[union-attr]
normalize_uri = scheme is None or scheme.lower() in _NORMALIZABLE_SCHEMES
if scheme:
scheme = scheme.lower()
if authority:
auth, _, host_port = authority.rpartition("@")
auth = auth or None
host, port = _HOST_PORT_RE.match(host_port).groups() # type: ignore[union-attr]
if auth and normalize_uri:
auth = _encode_invalid_chars(auth, _USERINFO_CHARS)
if port == "":
port = None
else:
auth, host, port = None, None, None
if port is not None:
port_int = int(port)
if not (0 <= port_int <= 65535):
raise LocationParseError(url)
else:
port_int = None
host = _normalize_host(host, scheme)
if normalize_uri and path:
path = _remove_path_dot_segments(path)
path = _encode_invalid_chars(path, _PATH_CHARS)
if normalize_uri and query:
query = _encode_invalid_chars(query, _QUERY_CHARS)
if normalize_uri and fragment:
fragment = _encode_invalid_chars(fragment, _FRAGMENT_CHARS)
except (ValueError, AttributeError) as e:
raise LocationParseError(source_url) from e
# For the sake of backwards compatibility we put empty
# string values for path if there are any defined values
# beyond the path in the URL.
# TODO: Remove this when we break backwards compatibility.
if not path:
if query is not None or fragment is not None:
path = ""
else:
path = None
return Url(
scheme=scheme,
auth=auth,
host=host,
port=port_int,
path=path,
query=query,
fragment=fragment,
)