Your IP : 3.149.29.190
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
#
#
# rules.mk: standard rules for APR
#
#
# Configuration variables
#
apr_builddir=/opt/cpanel/ea-apr16/lib64/apr-1/build
apr_builders=/opt/cpanel/ea-apr16/lib64/apr-1/build
top_builddir=/opt/cpanel/ea-apr16/lib64/apr-1/build
# Some layouts require knowing what version we are at.
APR_MAJOR_VERSION=1
APR_DOTTED_VERSION=1.7.5
CC=gcc
CC_FOR_BUILD=gcc
RM=rm
AWK=gawk
SHELL=/bin/sh
LIBTOOL=$(SHELL) $(apr_builddir)/libtool
# compilation and linking flags that are supposed to be set only by the user.
# configure adds to them for tests, but we restore them at the end.
#
CFLAGS=
CPPFLAGS=
LDFLAGS=
LIBS=
DEFS=-DHAVE_CONFIG_H
# anything added to the standard flags by configure is moved to EXTRA_*
# at the end of the process.
#
EXTRA_CFLAGS=-g -O2 -pthread
EXTRA_CPPFLAGS=-DLINUX -D_REENTRANT -D_GNU_SOURCE
EXTRA_LDFLAGS=
EXTRA_LIBS=-luuid -lcrypt -lpthread -ldl
EXTRA_INCLUDES=
# CPPFLAGS which are used only while building APR itself
#
INTERNAL_CPPFLAGS=
# NOTEST_* are flags and libraries that can be added by the user without
# causing them to be used in configure tests (necessary for things like
# -Werror and other strict warnings that maintainers like to use).
#
NOTEST_CFLAGS=
NOTEST_CPPFLAGS=
NOTEST_LDFLAGS=
NOTEST_LIBS=
# Finally, combine all of the flags together in the proper order so that
# the user-defined flags can always override the configure ones, if needed.
# Note that includes are listed after the flags because -I options have
# left-to-right precedence and CPPFLAGS may include user-defined overrides.
#
ALL_CFLAGS = $(EXTRA_CFLAGS) $(NOTEST_CFLAGS) $(CFLAGS)
ALL_CPPFLAGS = $(DEFS) $(INTERNAL_CPPFLAGS) $(EXTRA_CPPFLAGS) $(NOTEST_CPPFLAGS) $(CPPFLAGS)
ALL_LDFLAGS = $(EXTRA_LDFLAGS) $(NOTEST_LDFLAGS) $(LDFLAGS)
ALL_LIBS = $(LIBS) $(NOTEST_LIBS) $(EXTRA_LIBS)
ALL_INCLUDES = $(INCLUDES) $(EXTRA_INCLUDES)
LTFLAGS = --silent
LT_LDFLAGS =
# The set of object files that will be linked into the target library.
# The build-outputs.mk specifies a different set for each platform. The
# configure script will select the appropriate set.
#
OBJECTS = $(OBJECTS_unix)
#
# Basic macro setup
#
COMPILE = $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(ALL_INCLUDES)
LT_COMPILE = $(LIBTOOL) $(LTFLAGS) --mode=compile --tag=CC $(COMPILE) -o $@ -c $< && touch $@
LINK = $(LIBTOOL) $(LTFLAGS) --mode=link --tag=CC $(COMPILE) $(LT_LDFLAGS) $(LT_VERSION) $(ALL_LDFLAGS) -o $@
APR_MKDIR = $(apr_builders)/mkdir.sh
APR_MKEXPORT = $(AWK) -f $(apr_builders)/make_exports.awk
APR_MKVAREXPORT = $(AWK) -f $(apr_builders)/make_var_export.awk
MKDEP = $(CC) -MM
#
# Standard build rules
#
all: all-recursive
depend: depend-recursive
clean: clean-recursive
distclean: distclean-recursive
extraclean: extraclean-recursive
install: all-recursive
all-recursive depend-recursive:
@otarget=`echo $@ | sed s/-recursive//`; \
list='$(SOURCE_DIRS)'; \
for i in $$list; do \
if test -f "$$i/Makefile"; then \
target="$$otarget"; \
echo "Making $$target in $$i"; \
if test "$$i" = "."; then \
made_local=yes; \
target="local-$$target"; \
fi; \
(cd $$i && $(MAKE) $$target) || exit 1; \
fi; \
done; \
if test "$$otarget" = "all" && test -z "$(TARGETS)"; then \
made_local=yes; \
fi; \
if test "$$made_local" != "yes"; then \
$(MAKE) "local-$$otarget" || exit 1; \
fi
clean-recursive distclean-recursive extraclean-recursive:
@otarget=`echo $@ | sed s/-recursive//`; \
list='$(CLEAN_SUBDIRS)'; \
for i in $$list; do \
if test -f "$$i/Makefile"; then \
target="$$otarget"; \
echo "Making $$target in $$i"; \
if test "$$i" = "."; then \
made_local=yes; \
target="local-$$target"; \
fi; \
(cd $$i && $(MAKE) $$target); \
fi; \
done; \
if test "$$otarget" = "all" && test -z "$(TARGETS)"; then \
made_local=yes; \
fi; \
if test "$$made_local" != "yes"; then \
$(MAKE) "local-$$otarget"; \
fi
# autoconf 2.5x is creating a 'autom4te.cache' directory
# In case someone ran autoconf by hand, get rid of that directory
# as well.
local-clean: x-local-clean
@list='. $(SOURCE_DIRS)'; \
for i in $$list; do \
echo $(RM) -f $$i/*.o $$i/*.lo $$i/*.a $$i/*.la $$i/*.so $$i/*.obj; \
$(RM) -f $$i/*.o $$i/*.lo $$i/*.a $$i/*.la $$i/*.so $$i/*.obj; \
echo $(RM) -rf $$i/.libs; \
$(RM) -rf $$i/.libs; \
done
$(RM) -f $(CLEAN_TARGETS) $(PROGRAMS)
$(RM) -rf autom4te.cache
local-distclean: local-clean x-local-distclean
$(RM) -f Makefile $(DISTCLEAN_TARGETS)
local-extraclean: local-distclean x-local-extraclean
@if test -n "$(EXTRACLEAN_TARGETS)"; then \
echo $(RM) -f $(EXTRACLEAN_TARGETS) ; \
$(RM) -f $(EXTRACLEAN_TARGETS) ; \
fi
local-all: $(TARGETS)
local-depend: x-local-depend
@if test -n "`ls $(srcdir)/*.c 2> /dev/null`"; then \
$(RM) -f .deps; \
list='$(srcdir)/*.c'; \
for i in $$list; do \
$(MKDEP) $(ALL_CPPFLAGS) $(ALL_INCLUDES) $$i | sed 's/\.o:/.lo:/' >> .deps; \
done; \
fi
# to be filled in by the actual Makefile
x-local-depend x-local-clean x-local-distclean x-local-extraclean:
#
# Implicit rules for creating outputs from input files
#
.SUFFIXES:
.SUFFIXES: .c .lo .o
.c.o:
$(COMPILE) -c $<
.c.lo:
$(LT_COMPILE)
.PHONY: all all-recursive local-all install \
depend depend-recursive local-depend x-local-depend \
clean clean-recursive local-clean x-local-clean \
distclean distclean-recursive local-distclean x-local-distclean \
extraclean extraclean-recursive local-extraclean x-local-extraclean